QUALIFIED ACCESS
The CS1 data sheet is gated.
Sixty seconds of context unlocks it — who you are and what you're rejecting. Technical depth is shared with qualified teams only.
Request access →
← Back to site
← BACK TO SPECS
{{ accessLine }}
CHILLER SPACE
PRELIMINARY DATA SHEET · REV A
{{ sheetMeta }}
CS1
150 KW THERMAL REJECTION MODULE · PUMPED LOOP · FLIGHT-PROVEN CLASS

Standard drop-in thermal module for high-power spacecraft: microchannel cold plates, closed warm PGW pumped loop, and a two-sided deployable tube-and-fin radiator. Bolts to the host vehicle and ties into the customer coolant loop at a single fluid interface. Anchored on an NVIDIA GB300 NVL72-class rack; the same module serves any 150 kW-class heat source.

SUN VECTOR — PANELS FLY KNIFE-EDGE RADIATOR — TUBE-AND-FIN TWO-SIDED · ~110 M² · ~345 K PUMPED-LOOP MODULE PGW · ~2 KG/S · N+1 PUMPS, HOT-SWAP 150 KW REJECTED AT ~345 K FIG. 01 — DEPLOYED ELEVATION · NOT TO SCALE
TABLE 01 — HEADLINE SPECIFICATION
HEAT REJECTION
150 kW module — flight-proven class
ANCHOR LOAD
NVIDIA GB300 NVL72-class rack — ~140 kW · 117 cold-plate interfaces
RADIATOR
Metal tube-and-fin · two-sided · ~345 K · edge-on to sun
RADIATOR AREA
~110 m² deployable
WORKING FLUID
Propylene-glycol-water (PGW) · closed warm loop
LOOP FLOW
~2 kg/s at ~20 K rise
PUMP
N+1 redundant · hot-swappable BLDC · ~1–1.5 kW electric
COLD PLATE
Metal microchannel (baseline) → direct-die / liquid-metal option
MOUNTING
A: direct GPU mount · B: solar-wing back mount
HERITAGE / TRL
Proven pumped-loop architecture · TRL 7 family
THERMAL CHAIN — CHIP SIDE TO SPACE
01TIM2 interface — customer lid → cold plate; spec begins at the lid
02Cold plate — metal microchannel per GPU / CPU / switch
03Pumped loop — PGW · ~2 kg/s · 20 K rise
04Pump — N+1 · hot-swappable · only moving part
05Radiator — tube-and-fin · ~345 K · both faces
06Structure — booms · Whipple shield · brackets (scope per customer)
ANCHOR LOAD — GB300 NVL72-CLASS
72 × GPU @ ~1.4 kW~101 kW
36 × Grace CPU · 9 × switch trayincl.
Rack total~140 kW
CS1 rating150 kW
NAMING
CS1 standard 150 kW class · CS1-2 size variant · CS1 Rev B design revision
Scope & interfaces. Chiller Space scope begins at the TIM2 layer (package lid) and ends at space. Die-to-lid TIM remains with the customer. Deploy booms, Whipple micrometeoroid shielding, and mounting brackets are shared scope, settled per customer during ICD. A full Interface Control Document is available to qualified buyers under NDA — request via the site or contact@chillerspace.com.
{{ preparedLine }}
PRELIMINARY — SPECIFICATIONS SUBJECT TO CHANGE · NOT AN OFFER OR QUOTATION
CHILLER SPACE · CONTACT@CHILLERSPACE.COM
SHARED WITH QUALIFIED PARTIES · DO NOT REDISTRIBUTE